The Centralite Zigbee Smart Water Sensor is your first line of defense against water damage by catching a water leak early, so you may be able to avoid expensive repairs and loss of treasured items. It is small, easy-to-use, and can be placed anywhere vulnerable to water leaks including water heaters, drain pans, and underneath sinks. It uses capacitance detection for sensitive and accurate detection of as little as 0.5 ounces of water. You can protect your home even when you're away with the Centralite Zigbee Smart Water Sensor.

Features

• Be alerted as soon as water is detected
  

  The Centralite Zigbee Smart Water Sensor will send a notification to alert you if water is detected, so you can take action early and mitigate further damage. 

• Detects as little as 0.5 ounces of water

  This smart water sensor uses capacitance detection for sensitive and accurate detection of as little as 0.5 ounces of water, ensuring you catch leaks early before there is expensive flood damage. 
  

• Automatically shut off water supply

  The Centralite Zigbee Smart Water Sensor can trigger a connected water shut-off valve to close the main water supply if water is detected, ensuring your home is protected against leak and flood damage, even when you’re away from home or unaware that there’s a problem. 

• Water Resistant
  

  The Centralite Zigbee Smart Water Sensor is water resistance to ensure notifications are sent before damage to sensor occurs.
  

• Built-in power amplifier for exceptional range

  This smart water sensor includes a built-in power amplifier to ensure superior range and stability in large homes or areas with wireless interference. 
  

• Simple "Pair-to-Pull" joining process
  

  The pairing process is as simple as pulling out a small plastic tab from the bottom of the device. There is nothing for the user to take apart or put back together.
  

COMPATIBILITY

Protocol

Works with

Compatible with All ZigBee HA 1.2 Platforms

• SmartThings
  
• Time Warner IntelligentHome
• Cox Homelife
• Bright House Networks Home Security and Automation
• Rogers Home Monitoring
• PEQ 

SPECS

Technical Specifications

• Rated: 3V
• Battery: CR-2 (1x)
• Battery Life: 2 to 3 years
• Operating Temperature: 0° to 40°C
• Temperature: -20° to 50°C
• Humidity Range: 0 to 90% RH. (non-condensing)
• Protocol: ZigBee HA 1.2
• TX Strength: +18 dBm
• RF Channels: 16
• Range: 300+ ft. (90+ m) L.O.S.
• Temp Accuracy: ±1.8 °C (max), –10 to 85 °C
• Precision: ±0.1 °C
• Includes: 1x - 3-Series Water Sensor 1x - CR-2 Battery 1x - Quick Start Guide

INSTALLATION

Installation Guide

Step 1: Open ZigBee Network for Joining

Using your controller or hub’s interface, enable the ZigBee network for joining.

Step 2: Pull Tab from Side of Sensor

Pull the small plastic tab out from the side of the sensor and it will immediately begin searching for a network to join.

Step 2: Finish Joining at Hub (optional)

Some hubs and controllers require additional steps such as naming or categorizing the device.